TECHNOLOGIES, INC.           The Art and Science... of Wastewater Treatment

A "Green" company
 since 1990

                   

Products

Batch and Continuous Flow Chemical Reaction Systems

pH adjustment, neutralization, precipitation and specialty chemical reaction systems

Clarifiers

Inclined Plate (IPC) Clarifiers

Control Panels

World class PLC and relay logic based panels

DAF (dissolved air flotation) Flotation Systems

Traditional and lamella plate dissolved air flotation (DAF) systems

Media Filters

Sand (deep bed and high rate), multi-media and specialty filters

Media Packs

Media Packs for oil / water (immiscible liquids), DAF, sedimentation and custom separation systems

Oil Water Separators

API, enhanced gravity and pressurized separators suitable for any application

Packaged Systems

Pre-packaged turnkey systems for hundreds of applications

Pump Packages

Centrifugal, positive displacement and progressive cavity pump packages

HFT....

About Us

• Company Profile

Customer List

Contact Us

Phone, E-mail, Fax, Etc...

Clarifier Sizing Spreadsheet

Below is a link to a clarifier sizing spreadsheet developed by Hydro-Flo Technologies.

By inputting the major design criteria, you can solve for the clarifier projected surface area and overall clarifier volume.

The spreadsheet operates on Microsoft Excel 2003 or later.

clarifier sizing calculations

Below is a sample shot of the spreadsheet.

Input            
What is the Process Flow Rate 100.00            
What is the Desired Hydralic Loading Ratio 0.39   NOTE:  The hydraulic loading ratio is typically set from .25 to .5  The lower the settling rate or specific gravity (of the settleable material) the lower the hydraulic loading ratio. 

Hydraulic loading ratios can be determined by field tests or calculated based on the specific gravity of the chemically treated solids.
What is the Desired Plate Spacing 1.93  
           
NOTE:  Plate spacing can be set to any number desired.  The recommended low is .75" and the high is usually 2" but higher can be specified if required by your application.  Plate spacing is usually determined by the quantity of   
                   
Call 630-762-0380 to talk to a Hydro-Flo application engineer
                   
Output            
Required PSA 256            
  Available Models Cross Sectional Velocity
In Ft/Min
(Upflow Media Pack)
Cross Sectional Velocity
In Ft/Min
(Downflow Media Pack)
Total Effective PSA
92 - 10 - 1 - ST OR PB 1.59 3.18 319
92 - 10 - 2 - ST OR PB 1.59 3.18 319
73 - 8 - 1 - ST OR PB 1.59 3.18 253
88 - 8 - 2 - ST OR PB 1.59 3.18 253
73 - 6 - 1 - ST OR PB 1.27 2.55 233
81 - 6 - 2 - ST OR PB 1.06 2.12 279
73 - 4 - 1 - ST OR PB 0.80 1.59 240
76 - 4 - 2 - ST OR PB 0.80 1.59 240
                   
  Required Cubic Feet of Media   Overall Plate Length   Number of Influent Troughs   Sludge Thickening
or
Pyramid Hopper
     
                   

Why Choose
Hydro-Flo Technologies

 

Employment
Opportunities

 

Engineering Tools

Typical Applications

Follow this link to our library of application P&ID's and process descriptions

Application Questionnaire

Follow this link to our equipment application questionnaire

Clarifier Sizing information

Inclined Plate Clarifier Design Parameters
Detailed information on the design and sizing of inclined plate clarifiers and clarification systems

Dissolved Air Flotation System Design & Sizing information

Dissolved Air Flotation Design Parameters
Detailed information on the design and sizing of dissolved air flotation separators and separation systems

Oil Water Separator Design & Sizing information

Oil Water Separator Design Parameters
Detailed information on the design and sizing of oil water separators and separation systems

Misc Info, Data, Spreadsheets & Calculations

EPA Non-Polar Oil Test Methods

Fluid Mechanics

Reynolds Number Calculations

Water Hammer Calculations

HFT Quality Control

HFT Quality Assurance Plan

Steel Fabrications

Leak Test Certification

Interior Coatings

Exterior Coatings

Control Panels

Chemical / Material Compatibility Data

Chemical Pump Dosing Rates

Chemical Compatibility Chart

Properties of Plastic

Coating / Materials Data

Surface Prep Definitions

Standard Internal Coating

Standard External Base Coating

Standard External Top Coating

FRP Resin Cut Sheets

Gel Coat Cut Sheet

Wastewater Treatment Equipment